Spread ProcessingPRODUCT
NYCOTE®
Recognized worldwide as masking agents
for threads for product cost reduction and efficiency increase
- Protection from welding spatters
- Protection from electrodeposition coating
NYCOTE® demonstrates a masking effect for the protection of threads.
It provides 98% non-conductive pure Teflon® PFA fluoropolymer powder coating, protecting threads in various situations.
NYCOTE®, which can be actually applied to various types of fasteners, is widely used in manufacturing industries, such as agriculture, automobiles, appliances, electronics, air conditioning, machinery, oceans, outdoor power supply recreation equipment, and communications.
Application image of NYCOTE®
NYCOTE® is a masking agent for threads.
It protects threads
from welding spatters and cationic coating.
Three features of NYCOTE®
Point1
NYCOTE® protects threads from welding spatters that occur during welding.
NYCOTE® prevents adhesion of welding spatters.
In the photo on the left, NYCOTE® is applied to the lower half of the iron plate to scatter welding spatters. As shown in the photo, no welding spatters adhere to the NYCOTE® applied area.
Applying NYCOTE® reduces the following processes and costs generated during welding.
- Capping of screws
- Re-tapping after welding
Point2
NYCOTE® protects threads from cationic coating (electrodeposition coating) and primer coating.
NYCOTE® demonstrates a masking effect.
In the photo on the left, cationic coating is applied to the NYCOTE® applied automotive parts. It is shown that no coating is applied to the NYCOTE® applied threads.
Applying NYCOTE® reduces the following processes and costs generated during coating.
- Capping of screws
- Re-tapping after coating
Point3
NYCOTE® improves lubricity to stabilize the axial force.
The PFA used in NYCOTE® has excellent lubricity.
PFA, a type of fluoropolymer (Teflon) used in NYCOTE®, has excellent lubricity due to its low wear and thermal reversibility.
NYCOTE® has the effect of stabilizing the axial force by reducing the insertion torque.
Contact the following for consultations and inquiries about NYCOTE®
We support design changes! We can also make a sample even for a single item!
Responsible personnel:furubayashi
Tanaka Precoat Co., Ltd.
Moriguchi Plant
4-29-13 Minamiterakatahigashidori, Moriguchi-shi, Osaka 570-0043 Japan
Responsible personnel:Tanaka
Tanaka Precoat Co., Ltd.
Kanie Plant
Ōmiyo-134, Kanie Shinden Kanie-cho,
Ama-gun, Aichi 497-0044 Japan
Click here to download the NYCOTE® brochure.
Download PDF*NYCOTE® is a registered trademark of Nylock Inc.