Spread ProcessingPRODUCT
LOCTITE®
Earth-friendly water-soluble loose stopping and sealing agents widely used around the world.
- Sealing agents
- Shelf life of one year
LOCTITE® is a water-soluble spread processing product that is friendly to humans and the Earth.
Having a shelf life of one year and excellent storage performance, it is used around the world.
*This is a NETIS-registered product. Click here for details
Reactive LOCTITE® Lineup
High strength
LOCTITE®200
Demonstrates a high-strength anti-loosening effect.
Medium strength
LOCTITE®202
Demonstrates a medium-strength anti-loosening effect.
Low strength
LOCTITE®203
Demonstrates a low-strength anti-loosening effect
Maximum strength
LOCTITE®204
Demonstrates a maximum-strength anti-loosening effect.
For use at high temperature
LOCTITE®201
Can be used at high temperature.
| Application | Anti-loosening | Anti-loosening | Anti-loosening | Anti-loosening | Anti-loosening | Anti-loosening |
|---|---|---|---|---|---|---|
| Grade | 200 | 201 | 202 | 203 | 204 | 2045 |
| Color | Yellow | Yellow | Green | Gray | red | Peach |
| Recommended size | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified |
| Operating temperature range(℃) | -55 to 150 | -55 to 200 | -55 to 150 | -55 to 150 | -55 to 150 | -55 to 180 |
| Shelf life *1 | One year | One year | One year | One year | One year | One year |
| Main coating composition | Acrylic | Acrylic | Acrylic | Acrylic | Acrylic | Acrylic |
| Solvent | Water | Water | Water | Water | Water | Water |
| Features | High strength | High strength For heat resistance |
Medium strength | Low strength | Maximum strength | Maximum strength For heat resistance |
| Material *2 | 11.3 to 13.7 | 13.7 to 15.7 | 9.3 to 12.3 | 7.4 to 9.8 | 14.7 to 16.7 | - |
| Zinc chromate *2 | 8.8 to 11.8 | 11.8 to 14.7 | 7.8 to 11.2 | 4.9 to 7.4 | 12.7 to 15.7 | - |
| Phosphoric acid film *2 | - | - | - | - | - | - |
*1 Early use is recommended, although the product has a shelf life of one year.
*2 The unit is N・m. The values show the breakdown torque that occurs when M10 P1.5 bolts and nuts are used and 72 hours elapse at room temperature with a tightening torque of 0 N・m. The data are values obtained by our experiment and may differ from the actual values.
Liquid leakage prevention effect
LOCTITE®503
Demonstrates a liquid leakage prevention effect.
| Application | Liquid leakage prevention | |||||
|---|---|---|---|---|---|---|
| Grade | 503 | |||||
| Color | White | |||||
| Recommended size | Not specified | |||||
| Operating temperature range(℃) | -55 to 120 | |||||
| Shelf life *1 | Two years | |||||
| Main coating composition | Acrylic | |||||
| Solvent | Water | |||||
| Features | - | |||||
| Material *2 | - | |||||
| Zinc chromate *2 | - | |||||
| Phosphoric acid film *2 | - |
* Early use is recommended, although the product has a shelf life of two years.
Registered in NETIS
This product has been registered in New Technology Information System (NETIS).
Technical Title: Anti-loosening technology for bolts and nuts using pre-coating adhesive LOCTITE / Registration No.: KK-180033-A
For details, click New Technology Information System (NETIS).
Differences between reactive and non-reactive pre-coating
The spread processing has a lineup of reactive and non-reactive processing, each of which has different features. See Differences between reactive and non-reactive pre-coatingfor details.
Contact the following for consultations and inquiries about LOCTITE®
We support design changes! We can also make a sample even for a single item!
Responsible personnel:furubayashi
Tanaka Precoat Co., Ltd.
Moriguchi Plant
4-29-13 Minamiterakatahigashidori, Moriguchi-shi, Osaka 570-0043 Japan
Responsible personnel:Tanaka
Tanaka Precoat Co., Ltd.
Kanie Plant
Ōmiyo-134, Kanie Shinden Kanie-cho,
Ama-gun, Aichi 497-0044 Japan
Click here to download the LOCTITE® brochure.
Download PDF
Click here to download the dry seal brochure.
Click here to download the LOCTITE® 2045 brochure.
*LOCTITE® is a registered trademark of Henkel Japan K.K.